• <button id="zpkzt"><object id="zpkzt"></object></button>
    <li id="zpkzt"><acronym id="zpkzt"></acronym></li>

    <em id="zpkzt"><acronym id="zpkzt"><input id="zpkzt"></input></acronym></em>
    <em id="zpkzt"><acronym id="zpkzt"><input id="zpkzt"></input></acronym></em>
    <s id="zpkzt"><object id="zpkzt"></object></s>


    宜賓紅星敏感電器有限公司

    地址:四川省宜賓市高縣工業園區福溪功能區1號廠房

    電話:0838-2511895

          0838-2502506
      
    手機:15308258393
       13340858576
    傳真:0838-2511895
       0838-2502506
    郵箱:0838-2511895@qq.com

    產品展示
    • 商品名稱: 臭氧發生片
    • 商品編號: c01
    • 上架時間: 2012-12-05
    • 瀏覽次數: 653

      產品特點Feature of product

      FCY系列高效陶瓷臭氧發生片采用了目前國際上先進的“高頻陶瓷沿面放電生成臭氧技術”,選用高鋁陶瓷作為發生片的基體,以特制電極材料,經絲網印刷及高溫燒結制成,產品具有高機械強度、高耐壓、體積小、臭氧發生量大、耗電小、壽命長等特點, 并符合RoHS要求。

      FCY series high efficiency ceramic ozone generating plate used advanced ‘high frequency ceramic along face discharge technique’ at world. High alumina ceramic is used as base of the ozone generating plate. This product is manufactured by screen printing and high temperature sintering with a special made electrode material. It has features such as high mechanical strength and dielectric strength, small volume, large ozone generating capacity, low power consumption and long life, etc. The products accord to RoHS requirement.

      使用說明Definition of use

      陶瓷高效臭氧發生器件使用方便,只須接上專用配套的高頻高壓電源,即可正常工作。連接方式有焊接式和插入式兩種,焊接式臭氧片背面有兩個焊點或焊條,將高頻高壓電源的高壓輸出端焊接到臭氧片上即可(不分極性);插入式臭氧片有插頭和插座,將高頻高壓電源的高壓輸出端插到臭氧片的插座上,然后將臭氧片插頭插入插座即可(不分極錯誤!鏈接無效。。

      Use of this device is very convenient. When it is connected to high frequency high voltage power, the device may normal work. Methods of connecting have welding type and inserted type. Welding type ozone generating plate has two points or welding stick, the output terminal of the power is connected with welding point or welding stick of the ozone generating plate ( no polar ). Inserted type ozone generating plate has plug and socket, the output terminal of the power is plugged to the socket of the ozone generating plate ( no polar ).

      注意事項Points for attention:

      ● 運輸、安裝、焊接、使用臭氧發生片時,請勿摔砸、撞擊、切勿用硬器劃傷正面和背面電極;

      ● 與高壓電源連接時,應焊接良好,經檢測應無打火、虛接現象;

      ● 焊接式臭氧片在與引線進行焊接時,應使用恒溫<25W電烙鐵,焊接應快速完成,避免因局部突然受熱造成臭氧片斷裂,或因瓷片端頭可焊部位長時間受高溫而使電極脫落;

      ● 插拔直插式臭氧片時,應手持插頭進行,不應手持臭氧片主體;

      ● 臭氧片工作時,溫度略有升高,這是正?,F象,加大空氣(氧氣)流量,可降低溫度。若使用冷干機進行氣源預處理,則臭氧片工作效果更好;

      ● 使用環境不應有易燃易爆物品;

      ● 請置于干燥處儲藏保存。

      ● When the ozone generating plate is transported, welded, installed and used,please not fall and impulse the ceramic plate, and not cut the electrodes on the ceramic plate by a hard article.

      ● When the ozone generating plate is connected to the power, should take good welding.

      ● When the leads are welded, the constant temperature electric iron (<25w )must be used to avoid fracture of the ceramic plate and shedding of the electrodes.

      ● When inserting or drawing the ceramic plate, the plug should be held by hand, should not hold the base of ceramic plate.

      ● When the ozone generating plate operating, its temperature will slightly rise. It increase flow of air ( oxygen ), may down temperature of the ozone generating plate. If a day cooling machine is used for pretreatment of the air supply, high efficiency can be achieved.

      ● In operating place, should not exist a inflammable cargo and explosive cargo.

      ● Please store at a dry place.

      技術參數Technical parameter

    型號
    Tape

    基本尺寸
    Base size
    (mm)

    固有電容量
    Natural capacity
    (PF)

    耐壓
    Dielectric strength (KV)

    產率
    Generating rate
    (mg/h)

    安裝方式   
    Mounting mode

    平均無故障工作時間
    Average no fault operating time( K h )

    FCY-0005

    Φ16

    2

    4

    5

    卡式或錫焊

    >8千小時

    FCY-0030

    19×15×0.64

    3

    4

    30

    錫焊

    >8千小時

    FCY-0050

    25×10×0.47

    5

    4

    50

    錫焊

    >8千小時

    FCY-0110C

    37×15×0.64

    10

    6

    100

    卡式或錫焊

    >8千小時

    FCY-0150

    50×15×0.64

    20

    6

    150

    卡式或錫焊 Clamping or tin soldering

    >8千小時

    FCY-0180

    60×15×0.64

    22

    6

    180

    卡式或錫焊 Clamping or tin soldering

    >8千小時

    FCY-0210

    70×15×0.64

    25

    6

    200

    卡式或錫焊 Clamping or tin soldering

    >8千小時

    FCY-0300

    49×25×1

    30

    8

    300

    錫焊 Tin soldering

    >8千小時

    FCY-0500

    50×30×1

    35

    8

    500

    直插

    >8千小時

    FCY-0500P

    50×30×1

    35

    8

    500

    錫焊Tin soldering

    >8千小時

    FCY-0500A

    60×50×1

    35

    8

    500

    直插

    >8千小時

    FCY-0600

    70×27×1

    65

    8

    600

    卡式或錫焊Clamping or tin soldering

    >8千小時

    FCY-1100

    70×40×1

    80

    8

    1000

    直插 Direct inserting

    >8千小時

    FCY-1100P

    70×40×1

    80

    8

    1000

    錫焊 Tin soldering

    >8千小時

    FCY-1000

    70×30×1

    45

    8

    1000

     

    >8千小時

    FCY-3500

    90×50×1

    120

    8

    3500

    直插Direct inserting

    8千小時

    FCY-3500P

    90×50×1

    120

    8

    3500

    錫焊 Tin soldering

    >8千小時

    FCY-3500A

    115×52×0.64

    150

    6

    3500

    錫焊 Tin soldering

    >8千小時

    FCY-3500B

    115×66×1K5

    120

    8

    3500

    錫焊Tin soldering

    >8千小時

    FCY-3500D

    90×50×1

    120

    8

    3500

     

    >8千小時

    FCY-5000

    115×66×1

    340

    8

    5000

    直插 Direct inserting

    >8千小時

    FCY-7000

    152×92×1

    400

    8

    7000

    直插Direct inserting

    >8千小時

    FCY-10000

    165×95×1

    500

    8

    10000

    直插 Direct inserting

    >8千小時

      備注Notes

      ● 表中的臭氧產率是一個參考值,是指以空氣為氣源的臭氧產率,它與空氣在陶瓷片表面的流量,空氣中的含氧量、溫度、濕度、工作電壓、工作頻率、電源與瓷片的匹配度等工作條件有關。

      ● 工作環境(供氣條件):溫度<50℃,相對濕度<80℃RH。若用冷干空氣為氣源,則工作效果更好。

      ● 臭氧檢測方法為中性碘化鉀法,按CJ/T3028.1-2-94標準檢測。

      ● In above tab. ozone generating rate is a reference value with air as gas supply. This ozone generating rate is related to the air flow on ceramic surface, temperature, operating voltage, operating frequency and matching condition for the power to the ceramic plate.

      ● Service condition ( air supply condition ): Temperature ≤50℃, Relative humidity ≤80%.

      ● Test way for ozone is neutral potassium iodide method according CJ/ T3028, 1-2-94 standard.